The effectiveness and efficiency of using a vacuum cleaner makes it a mainstay when cleaning various types of materials and rooms. So, many people who use this vacuum cleaner regularly to keep the house clean. However, it is not just the house and the room that must be kept clean, the cleanliness of the vacuum cleaner also needs to be considered so that this machine can be durable and long lasting.
How to clean the vacuum cleaner is also not arbitrary, there are parts of the vacuum cleaner that requires special care to stay durable. However, you need to know that the parts of the vacuum cleaner also vary by type. Broadly speaking, vacuum cleaners are divided into two types, namely vacuum cleaners dry and also wet & dry. Dry type vacuum cleaner can be used only in dry areas. Whereas wet & dry vacuum cleaners can be used in both dry and wet areas.
Before cleaning the vacuum cleaner, you must understand that using a vacuum cleaner should not be used to suck large particles because it can clog the vacuum cleaner hose and cause the engine to heat up and make a rough sound. This will relate to cleaning and maintaining a vacuum cleaner. As for cleaning the vacuum cleaner, you also have to pay attention to the parts of the vacuum cleaner in it.
Cable
Before performing vacuum cleaner maintenance, you should check the power cord of the vacuum cleaner. Make sure the cable has been disconnected from the power supply before cleaning the vacuum cleaner. In addition, do not let the vacuum cleaner cable be convoluted because it will cause damage to the cable.
Shelter Bags
Also check the storage bag on the vacuum cleaner. You must remove the dirt inside it if one third of the contents of the bag already contains dirt. This is because the air will pass through the dust and a full bag can make the vacuum cleaner work harder.
Brush
The brush parts on the vacuum cleaner also need to be cleaned periodically. You need to clean the dirt stuck to the brush.
Filters and Hoses
Filters and hoses are parts of a vacuum cleaner that must also be cleaned. You can wash the filter cleaner on a vacuum cleaner if it is made of plastic, foam or cloth. However, you must be careful when washing so that no part of the filter is torn. If the vacuum cleaner filter is made of paper, you just need to clean it using your hands until all the dirt in the filter falls out.
To use a wet & dry type vacuum cleane in a wet area, you must remove the dust filter before use. Meanwhile, when cleaning for dry or dusty areas, install filter bags and clean if dirty.
Water Tank
If you use a wet & dry type vacuum cleaner, you should pay more attention when you suck in water. If when you use the vacuum cleaner and the tank inside is full, stop using it and relieve it. If you do not dispose of it immediately when you are going to use a wet & dry vacuum type cleaner, the engine can catch fire.
Main Engine
Stop using the vacuum cleaner if you have been for 1 hour non-stop. Rest the machine for 10 minutes then use it again to clean your room.
Other Parts
Also clean other vacuum cleaner parts such as motor blocks, waterbells, containers, suction pipes, vacuum hoses and suction sticks. Roll the cable neatly too.
Those are some parts of the vacuum cleaner that you should consider before cleaning the vacuum cleaner. The vacuum cleaner will work optimally if you pay attention to the maintenance of the components above. In addition, with good care and correct, your vacuum cleaner will be durable and long lasting.
