Every industrial machine must have the risk of being damaged at any time. The cause of industrial machinery damage could be due to its old age, lack of maintenance, to human error during operation. To ascertain what causes the machine can be damaged, please refer to the following explanation.

1. The Existence of Human Error

The human error factor or human error can be the main cause of industrial machine damage. The technician or operator that you send to operate the machine still lacks knowledge or experience, which reduces the quality of work. That way, operating errors will be much higher to occur.

Therefore, to avoid the risk of damage caused by the operator, you need to do training whenever there are new workers or new machines. Explain in detail how the machine operates to the operator so that they can reliably run it. Then, also equip industrial machines with a manual book or video tutorial on how to operate.

2. The Machine is Not Regularly Cleaned

Trivial problems such as not being diligent in cleaning tools can also cause damage to industrial machines. If ignored, over time the dust and dirt that sticks to the machine will damage the outer layer, then spread to the inside. At first, the machine may look normal, it can still function normally. However, over time, this dirt will make the engine function decrease until it reaches a weak point and damage occurs.

3. Unsuitable Storage Space

Maintenance problems have again become the cause of industrial machinery damage. This time, the storage space that is not up to standard can eat away at the machine's performance until it crashes. Humidity and air pressure from the environment can affect engine parts. If the humidity and pressure are not suitable, it can damage your engine. Starting from the outside, over time the inside of the machine is affected so that it cannot function optimally.

4. The Age of Industrial Machines is Old

No machine or other item can last and last forever. Surely there are things that can make its function and performance decrease. In this case, the age factor cannot be denied that your industrial machine is damaged. Indeed, every machine has a maximum age of use. If it has exceeded this time period, the performance will automatically decrease until it does not work at all. If you have this, the most appropriate step is to buy a new machine.

5. Replacement of Incompatible Parts

Spare parts are replacement parts for damaged industrial machine parts. Usually, the machine is damaged in several parts so it is necessary to replace the spare parts. Unfortunately, component replacement is often done not according to the manufacturer's instructions and recommendations. As a result, spare parts that do not match the recommendations actually damage the overall engine function.

6. Not Routinely Do Alignment

Finally, the factor that causes industrial machinery damage is not doing alignment regularly. For a machine, alignment is important to align the two axles that rotate on each other. If the two axles of the axle do not rotate properly, it will cause friction and vibration which ends up damaging the engine itself.

Therefore, do the alignment periodically to avoid damage. You can easily align the two axles of industrial machinery using the VLSAT TM. This tool is a laser shaft alignment that will align the machine shaft using laser technology. As a result, the alignment can be more accurate and fast. Reduce the cause of damage to your industrial machinery with VLSATTM wear axle alignment.