In any construction work that requires heavy work, you will be faced with a variety of heavy equipment, such as a dredger that requires a lot of power. In addition, if you meet a car repair shop that uses a tool first before washing the car, then the workshop also uses the hydraulic principle in the process. Hydraulic systems are often seen in car wash shops to make it easier to clean the bottom of a car that is difficult to reach without the system.
Then, what exactly is the meaning of the hydraulic system and the principles and ways of working carried out by the hydraulic pump? Check out the review below.
Understanding Hydraulic Systems
In physics, a hydraulic system is a form of power change that is carried out with liquid fluid media so as to obtain greater power than the original power released. The pressure on this conductive fluid is increased by using a pressure generating pump. Then, this pressure is passed on to the working cylinder by passing through the pipelines and valves.
This hydraulic system can also be produced from hydraulic motors that use pulleys with smaller torque power to rotate pulleys that have greater load power. This hydraulic system utilizes Pascal's law in its application.
Simple Hydraulic Pump Principles
Simply put, this hydraulic system is the force used or applied at one point to be moved to another point by using a liquid or oil that is pressed or compressed. That way, the compressed oil or oil can push the other side so that it can provide more power. A simple hydraulic pump uses two piston units and an oil or oil filled pipe.
Pascal's Law on Hydraulic Pumps
Hydraulic pumps use the principle of Pascal law in its application. The law that was created by Blaise Pascal stated that the pressure applied to a liquid in a certain place in a closed room would be continued in all directions with the same amount and pressure. It can also be assumed that the pressure on a container has the same magnitude on all sides. Pascal's law is stated in a simple formula that is the hydrostatic pressure proportional to the density of the liquid, the acceleration due to gravity and the difference in the height of the liquid between the two column points.
How a Hydraulic Pump Works
The way a simple hydraulic pump works is by applying pressure to a column of oil or liquid. If you apply pressure to the right side of the pipe, then the left side of the pipe will lift and exert a great force on the left side of the pipe. Uniquely, this pipe can be of any length and the hydraulic pump will continue to work normally as long as there are no leaks in the pipe because it can reduce pressure on oil.
This pipe can also be shaped like a fork, which is a large section of the pipe located below which can lift several small sections of the pipe above which are interconnected. There is also an advanced hydraulic pump in the form of a hydraulic circuit consisting of a hydraulic pump, regulating valve, hydraulic cylinders and motors, filters, as well as pipelines and fluid tanks. There are also hydraulic circuits that contain hydraulic motors with cylindrical actuators that are used as rotary power.
Use of Hydraulic Pumps
Hydraulic pumps are used in various fields, such as in car wash shops that use the principle of a simple hydraulic pump. There is also the use of bicycle pumps that use hydraulic pumps. In addition, the principle of hydraulic pumps is also used in cotton press machines.
Dynaset Hydraulic Generator
One of the proven quality hydraulic generators is the Dynaset generator which can be used in a variety of needs, especially in excavator, truck and heavy equipment handling materials. You can try to open the Hyprowira website as an official distributor of Dynaset Indonesia.
