Washing vehicles and machines that are prone to getting dirty because they are often exposed to dust and dirt is a mandatory routine as a form of caring for the cleanliness of vehicles and machinery that are routinely used. However, if the cost of washing vehicles and machines that are done routinely turns out to increase expenses, it's time you think to have your own by making high pressure water sprayers.

Making high pressure water sprayers requires several tools, materials, and a raft method that you can refer to below. By making your own high-pressure water spray, you can save more on routine washing machines and vehicles that require extra care.

Tool

Making high pressure water sprayers requires the following tools:

- Sprayer gun or water spray.

- Verloop sock with the size of adjusting the installation of piping at home.

- Water pumps and piping available.

- Ball valve or a quarter inch tap.

- Female coupler or quarter inch hose.

- Male coupler or quarter inch hose.

- High pressure hose or compressor hose with length adjusting to your needs.

- Hose clamps.

- Seal tips or white reel ribbons to glue the pipe assembly.

Price Forecasts

Making high pressure water sprayers has an estimated manufacturing price as follows:

- Sedan size water spray or 50 cm spray stick gun for IDR 55,000.

- Verloop with a size of three quarters x a quarter inch for IDR 25,000.

- A quarter-inch ball valve or tap for Rp. 20,000.

- A quarter inch male coupler and male coupler cost Rp. 10,000 each, so the total price is Rp. 20,000.

- Toyox high pressure hose for Rp. 18,000 per meter with length depending on needs.

- Hose clamps for Rp1,500.

- Seal tape for IDR 4,000.

With the estimated price above, the manufacturing of high pressure water spray machines is under Rp. 200,000. This price estimate makes the manufacture of high pressure water spraying machines a more cost effective expenditure when compared to routine washing of vehicles whose prices currently continue to rise.

How to Assemble

Making high pressure water sprayers requires steps and methods that you can follow as follows:

- Prepare a tool for making high pressure water sprayers as listed above.

- Attach the verloop to the knee by attaching the seal tape to the verloop to prevent pipe leakage.

- After that, attach the tap to the verloop by first installing the female coupler into the end of the hose.

- Next, attach the end of the hose that has been fitted with a female couple to the hose that is connected by piping to a home water pump.

- Next, attach the male coupler to the other end of the hose so that it can be attached to the spray gun.

- After the other end of the hose has been fitted with a male coupler, you can attach the hose end to the spray gun.

- Test the high pressure water sprayer first and check for leaks in the assembled parts.

That's the way to make high pressure water sprayers that you can do yourself at home. You can get all the tools at the nearest building shop and adjust the high-pressure water spray to suit your needs. Good luck!