How do I use a scrubber machine? Before discussing it, first you know what is a scrubber. So, a scrubber machine is a tool or automatic floor cleaning machine that is commonly used to clean large areas such as malls, offices, hospitals, and airports.
The shape is similar to a box, but with blunt edges. At the bottom, there is a brush that moves automatically to clean dirt, dust, and stains on the floor. Then, how do you use it? Check out the complete guide below!
How to use a scrubber machine
Scrubber machines can be said to greatly lighten and facilitate the job of cleaning large areas of the floor. This machine is used to clean the floor with a process that starts from wetting the floor surface, brushing it, vacuuming it, then sucking water and chemicals on the floor surface. As a result, 99% of the floor is clean and can be stepped on immediately without the need to use a blower or other dryer to dry the remaining cleaning water. How to use a scrubber machine starting from the preparation you can see below:
1. First, attach the scrubber brush (the round and black part with the brush at the bottom), then turn it counterclockwise.
2. After that, pull the locking rod of the brush disc and lower the brush by pushing the scrubber slightly forward. This part of the locking rod is on the side of the machine.
3. Open the water filling cover, fill it with enough clean water, then close it again.
4. Because how to use a scrubber machine requires an electric current, plug the power cable into the power source. It's a good idea to ensure the availability of a power source in the floor area to be cleaned so that the scrubber machine can be used.
5. Lower the lever to lower the squeegee and suction head.
6. Pull the other lever to adjust the tilt angle of the handle or handle that is used to push the scrubber machine.
7. Turn on the water supply.
8. Adjust the volume of water that comes out of the lower valve. Turn the lever toward "open" to open the current flow.
9. Start the vacuum motor.
10. Press the safety switch, then pull the switch handle up.
11. Gently push the scrubber over the area to be cleaned. Make sure this area is not too far from the power source to prevent the cables from becoming disconnected.
How to clean and store a scrubber machine
After you finish using the scrubber machine, it doesn't mean you can leave it and unplug it from the power source. You need to first remove the dirty water from the cleaning and also remove the brush. Here's the complete guide:
1. After finishing how to use the scrubber machine and the entire floor area is clean, turn off the water supply.
Raise the squeegee and suction head.
2. Turn off the vacuum motor.
3. Straighten the handle after use.
4. For storage, remove the brush by turning it clockwise.
5. Lock the brush disc by pushing the locking rod.
6. To remove dirty water, remove the hose (the black hose at the back of the scrubber machine) from the clamp.
7. Pull out the hose cover and direct it to the lower drain. Make sure all dirty water is wasted and that there is no residue in the hose.
8. Next is the disposal of clean water. As with dirty water, remove the hose and clamp. The hose for clean water is located a little below the dirty water hose.
9. Pull out the hose cover and direct it to the lower drain.
10. After the water is wasted, you can save the scrubber machine for future use.
Quite simple, right, how to operate a scrubber machine to clean a large floor area? You can use this machine for cleaning the floors of office buildings, malls, apartments, hospitals, and airports. Now that you know how to use a scrubber machine, it's time to have a floor scrubber machine for your own building!
