How to use a high pressure cleaner is actually quite easy, you just need to assemble all parts of the tool, flow the water into it, and point it at the object to be cleaned. Later, the high pressure water machine will automatically spray the water and shed the dirt on the object being sprayed.
Then, what objects can be cleaned with this tool? For industrial purposes, items that can be cleaned include trucks, heavy equipment, concrete, walls, granite, and others. If so, let's just look at how to operate a high pressure cleaner in the industrial sector!
Get to know a high pressure cleaner
High pressure cleaner is a device that uses water compression at high pressure. At first glance, it works similarly to a compressor. However, the medium that the compressor is usually compressed is air or gas. Meanwhile, the medium of high pressure cleaner is a liquid object in the form of clean water. The drive system of this machine is an electro motor and engine. Then, the circuit consists of an oil tank, trigger gun, water filter, motor pump, high pressure hose, and an ON / OFF switch.
How to use a high pressure cleaner
The function of the high pressure cleaner is to spray high pressure water from the hose to the object being cleaned. For example, trucks, heavy equipment, industrial vehicles, and so on. By using this tool, washing and cleaning of large objects is also maximized, fast, and practical.
How to use a high pressure cleaner is actually similar to using a vacuum cleaner. It remains only to direct the hose at the object to be cleaned. However, before it can be used to spray water, this tool needs to be prepared and assembled first.
1. First assemble the high pressure cleaner machine according to the instructions listed. Usually this circuit includes a water hose for spraying water and a drain hose.
2. Then, check the electrical voltage system that will be used. Make sure it matches the power requirements of the high pressure cleaner engine. Connect the machine cable to the power source.
3. Check the condition of the water to be used. Make sure the water is completely clean with a temperature between 5 ° C and 40 ° C. Avoid water sources that are in the bucket and preferably use running water from a tap.
4. Run water to the engine or high pressure cleaner pump until it is fully charged.
5. Turn on the engine and wait a few moments until the water coming out of the machine is smooth, fast, and doesn't choke.
6. Fit hoses properly.
7. When the water is smooth, the way to use a high pressure cleaner is to turn the head gun on the front hose trigger gun. Automatically, water will gush out on the object being cleaned.
Tips for caring for high pressure cleaner
After knowing how to use a high pressure cleaner, now is the time for you to understand how to properly care for this tool. Because it is not used every time, after using high pressure water, the parts should be cleaned and dismantled to avoid clogging or scale in them. Here are the steps:
1. Turn off the high pressure cleaner after use.
2. Turn off the water flow from the tap and make sure there is no more water flowing in the hoses.
3. Remove the remaining water in the machine by pressing the trigger gun.
4. Remove the high pressure hose from the machine.
5. If the water never runs out, restart the machine to lure water out of the hose.
6. Dry the machine and all the equipment using a dry, clean cloth.
7. Store in clean, dry, and away from direct sunlight.
8. Cover the machine with a cloth to reduce the dust stuck to it.
So, that was a brief guide to operating a high pressure cleaner. The most important thing is that you follow the installation tutorial that is listed in the manual and take good care of it after use. If you already understand how to use a high pressure cleaner, now is the time for you to enjoy the convenience of cleaning heavy equipment in the industry with the Hyprowira high pressure water machine!
