High levels of water in engine oil can cause corrosion and damage, especially to heavy machinery such as ships. Meanwhile, in the palm oil industry, it is important to ensure that the oil produced is not contaminated by water. That is why the water content in oil or lubricant must always be monitored and controlled.

When talking in the field of industry and marine affairs, of course there is no way to calculate water content that is more accurate than using tools. Currently, there are tools available that can provide figures for water content in certain media. The team of expert analysts will decide whether the water content can be considered dangerous.

Calculation Method for Water Content

There are two ways to calculate water content in oil or lubricant. First, the oil sample is taken and then put into a tool for measurement. Second, the water level meter is connected to a pipe that is oiled. The second way is considered more effective because the measurement can be more stable than measuring the sample. Because the water content in oil is not homogeneous - it can be different in each part.

The pipe used in the second method is usually a large pipe with a low pressure flow. The use of small pipes or high pressure is not recommended because it is less accurate. Instead, choose a sensor system that can be installed separately but still connected to the system with a tap connection. This can save time and energy if there are problems with the water level gauge or the oil tank. To get the best results, you should consider the features of the water meter you are going to buy.

The water content in a lubricant or oil is represented as a percent (%) of the total mass of oil. The unit is also known as ppm or parts per million. This percentage is scanned by the water sensor periodically along with temperature fluctuations that may occur in the engine.

Moisture Meter from Pall

With decades of experience in the field of heavy machinery for industry, Pall has one of the best moisture content sensors in its class. The Pall WS18 Series Water Sensor provides accurate water content readings so you can estimate when the lubricant needs to be renewed or when the engine needs service.

The presence of industrial water level sensors increases engine efficiency so that service life can be longer. Now, to get a clearer picture of quality, here are the details of the advantages of the Pall WS18 Series Water Sensor:

- Made specifically for industrial heavy machinery
- There is a temperature monitor
- Can be read according to the unit of measurement that you use frequently. You can choose between percent or ppm for water content, and Celsius or Fahrenheit for temperature measurements.
- Easy to install and operate
- Strong design and adapted to industrial quality
- There are choices with or without a screen

Besides all that, Pall WS18 also has its own software that you can use on a computer so that it's easy to set up and monitor the configuration of the tool. The sensor is connected to an oil source that can be adjusted using a tap. That way, sensors and tools can be removed without having to drain the tank.

There are many advantages that you can get by installing a moisture meter in the system. In many industries, controlling the water content of lubricants and fuels is one way to increase engine efficiency. For more complete information and rules for using Pall WS18, you can directly contact the official Pall distributor in Indonesia.