Industries that use factories as production centers cannot be underestimated. Not only in production management, but also maintenance of factory machinery. In factory production machinery, certainly has a variety of components. In order to have a good-performing machine, of course there must be a process for checking and maintaining the engine. If you do not do activities regularly, then in the future the machine will be damaged. In engine maintenance, there are several kinds of ways that can be done. One of them is varnish.
Varnish is a thin deposit layer that will not dissolve. Usually varnish will form on the surface of objects that have already been moistened with oil. Varnish is often found in turbine lubrication systems, including servo valves and bearings.
From the little explanation above, it is clear that factory machines that use turbine systems need to remove the varnish that usually appears when the engine is used continuously. To get to know more about varnish, the following explanation and function in the factory.
Definition of Varnish
As explained above, a varnish is an element that is usually present in a turbine lubrication system, including in the bearings and servo valves. As an element, varnish is a disturbing part. Why bother? Because varnish can withstand higher engine temperatures. In addition, smaller fluid reservoirs, lower solvability base oils and high service cycles.
With its disturbing position, of course in every factory there must be a good quality varnish removal system. If there is no varnish removal system, there will be no good production system. For this, it actually needs proper control of the varnish. If there is no varnish control, the result is sludge that interferes with engine performance and can make your factory unable to produce to its full potential.
Varnish Control
For factory owners who want to control varnish, Hyprowira provides services for this. We use The Pall Sentry resin based system. This system was designed to efficiently remove varnish precursors from oil. With this, the varnish deposits that usually appear on the surface can become dissolved again. That way, it can be immediately removed with the Sentry treatment skid.
To be able to clean up all the existing deposits, maintenance must be carried out continuously, especially when the turbine is operating. With continuous maintenance, the oil system can be free of varnish.
With this condition, then you should do the control of varnish regularly and continuously. Not only once at a time, but several times at a time. Surely you do not want the factory's machines to be disrupted in terms of performance to the point of being damaged, it cannot be used because of varnish deposits, right?
For those who are interested in controlling varnish, you can contact us by visiting our website. Click here to enter our website and read more about achieving important varnish control. Hyprowira is a manufacturer of machine maintenance services to distributors of various kinds of factory equipment and large industrial production. We are ready to provide the best service to you because that is what we have given to our clients who have used our services.
